Coating pre-treatment | sincere Electromechanical | coating pre-treatment procedures

Coating pre-treatment | sincere Electromechanical | coating pre-treatment procedures provided by the electromechanical sincere. Coating pre-treatment | sincere Electromechanical | coating pre-treatment equipment Guangzhou City sincere Electrical Equipment Co. (www.gzjcjd.com) 2014 has been newly introduced an upgrade, washing after washing rust removal, although belonging to the former painting auxiliary processes, but equally the need to attract enough attention. After degreasing rust easily attached to the surface of certain non-ionic surfactants and CL- and so on. These residual material if not thoroughly cleaned, it may cause thinning of the phosphate film coating pre-treatment equipment, resulting in linear defects, even not on phosphate. Therefore, to improve the water quality of rust after degreasing, rinsing repeatedly subject, two washing, processing time 1-2min before painting, and often replaced with water, ensuring water PH value between 5-7 values. Line Size L7000mm × W300mm × H1000mm timber using 40 × 40 × 2.0 aluminum production and lower with ￠ 75 × 12 × L100 Foot Cup coating pre-treatment line, the height of 980 ± 15 adjustable rails using 40 × 60 × 2.0 Aluminum making PVC belt width: W300, thickness: 2t, color: green imported anti-static belt