Temperature glass flake clay manufacturers

Advantages Description: Liuzhou plant desulfurization vinyl glass flake glass flake vinyl clay clay clay Liuzhou glass flake resin plant desulfurization glass flake vinyl clay glass flake coating (resin lining technology) was developed by the Shanghai Research Institute first out. The mid-1950s, the company launched fiberglass resin lining material containing glass flakes. According to the China Association of epoxy resin industry experts, this is a suitable hull and chemical storage tanks, chemical plants and tank tower excellent lining material, this material is resistant to penetration of environmental media, help extend lining lifetime. Over the same period, research institutes began Study of a better performance than the general unsaturated polyester (UP) epoxy vinyl ester resin (VE). Research Institute successfully developed VE glass flake paint, original glass flakes, in the form of construction of the liner viscosity successfully applied flue gas desulfurization equipment, and began practical, the technology also exported overseas, began a large-scale development and application. On the one hand, since the glass flake coating (lining) is millimeters thick coating of high, ideal for harsh corrosive environments, such as Mei Yang salt corrosion area, all kinds of chemical storage tanks, offshore structures, coastal concrete construction; special geographical environment has forced its long-term and effective glass flake coating amount of attention. For the evaluation of resin lining thin film technology, the current leader. By resin lining Industry Association set up a "thin lining Technology Research Council," conducted by osmotic diffusion theory plausible explanation, and actively carry out research and development of technologies and thin flake lining resin lining process, and expanded the scope of application of glass flake coatings. Glass flake coating is a thermosetting resin filled with a special treatment in the scaly glass (alkali glass, C glass), with the reinforcing of the (E-glass, E glass) as compared to a completely different composition ratios. Second, the advantages of glass flakes: 1, chemical media, gas, vapor permeability than the FRP Lining small, it is difficult to cause water vapor diffusion phenomenon, which is due to the arrangement of overlapping layers of glass flakes, long distance penetration of the medium's sake . 2, low shrinkage upon curing due to the dispersion, the residual stress of the adhesive surface. 3, the thermal expansion coefficient is small, the adhesive is correspondingly small thermal stress, high heat resistance, good heat shock resistance. 4, mechanical strength, though not as FRP Lining, but wear resistance, scratch resistance excellent for mechanical damage is also limited to the local. 5, glass flake paint construction process performance is also good. If the glass flake coating is only a physical mixture of the glass flakes and the resin is not fully exert its performance, there is also the problem of pre-treatment cross-section of the glass flakes, glass flakes, and the mixing amount of the mixing method, the choice of resin, the base, the primer a series of parameter selection, construction methods, etc., is to determine the key technology of glass flake coatings inquiry hotline 18832625505 Wang