_ Albert Shenzhen tile adhesive tile adhesive tile adhesive _ Shenzhen Brand

_ Albert Shenzhen tile adhesive tile adhesive tile adhesive _ Shenzhen brand provided by Albert cement. Shenzhen tile adhesive, Albert tile adhesive, tile adhesive Shenzhen price is Albert Cement Co., Ltd. of Dongguan City (www.weiyeshuini.com) 2014 年 launched a new upgraded tile stickers advantage of a strong bond, material saving, safe, secure, avoid hollowing or shedding phenomenon. 2, the construction of a wet brick wall without bubbles, can significantly improve the efficiency, convenient and quick. 3, with good barrier properties and anti-aging properties. 4, elastic, can absorb expansion and contraction between the substrate and the tile, thus extending the life of the tile. Surface treatment of the substrate surface should be firm smooth, dry and clean, free of grease, no concrete curing agents, mold release agents and other loose material Shenzhen tile adhesive brand, loose absorbent can be moistened with water. Operation process: 1, note slowly while stirring the powder into the water, and the tile adhesive with water by about 4: 1 (25kg / bag, about 6 to 6.5 kg of water with stirring into a uniform paste Shenzhen tile adhesive paste pictures , electric mixer works best if the glue stand for ten minutes and then stir to increase strength. 2, with tooth scraper will glue smear on the work surface tile adhesive agent in Shenzhen, Shenzhen evenly distributed so that tile adhesive, adjust the angle between the blade and the face to control the thickness of the mortar, each about smear 1m 'around, and then pressed on to the tile rub. 3, such as the back of the tile or stone ditch deeper paste, in addition to Face plastering the outside, but also in the back of the tile or slate back plastering Note: 1, must be confirmed squareness and flatness of the substrate prior to application 2, should the already dry glue mixed with water and then 3. Note retain joints 4, 24 hours after paving is completed before entering or caulk 5, the reference amount of the product suitable for use in an environment 5 ℃ ~ 40 ℃ is: When using different tooth scraper tile adhesive The reference amount: The amount of water scraper teeth deep TTB 6 × 6 (mm) 3.5 (kg / m2) 0.875 (l) 10 × 10 (mm) 5.0 (kg / m2) 1.25 (l) 12 × 12 (mm) 7.0 (kg / m2) 1.75 (l) the small size of the tile paste is recommended to use 6 × 6 (mm) of the tooth scraper pasting large size tiles, it is recommended to use 10 × 10 (mm) or 12 × 12 (mm ) of tooth scraper Net content: 20kg Shelf life: Unopened product in a dry, cool, ventilated place under normal conditions of storage and transportation, product shelf life of one year.