FPC FPC built-in antenna built-in antenna manufacturers _ Shenzhen factory _ Aerospace Communications

Product Name 2.4G internal antenna model HYA-2400ITF5-60 product description used in 2.4G user terminals. Electrical parameters Frequency range -MHz2400-2483 gain -dBi2.0 index measuring input VSWR impedance -Ω50 ≤2.0 gain the standard methods such as the far-field measurements of indoor antenna gain, half-power beamwidth, front and rear than the other indicators were For details, but was limited to the objective conditions of near-field measurement method without specific instructions. Domestic indoor far-field measurements influenced by the environment in Guangdong FPC large built-in antenna manufacturers, indoor low-gain antenna, the measurement accuracy is not enough Shenzhen FPC built-in antenna manufacturers, test results of field measurements differ greatly, for an objective assessment of the quality of the antenna cause some difficulties. Small size, low-gain antenna chamber divided, spherical near-field test high accuracy, good stability, high efficiency FPC built-in antenna manufacturers, and major domestic manufacturers have been building 128 antenna probe spherical near-field measurement site, using spherical near-field methods for measuring indoor antenna basic conditions. Product Name 2.4G internal antenna model HYA-2400ITF5-60 product description used in 2.4G user terminals. Electrical parameters Frequency range -MHz2400-2483 gain -dBi2.0 ≤2.0 input impedance -Ω50 VSWR Polarization Vertical Maximum Power -W20 Connector IPEX independently transmit information through these parallel spatial channels, the data rate is bound to increase. The multipath MIMO wireless channel with the transmitter, the receiver is optimized as a whole, in order to achieve a high communication capacity and spectral efficiency. And interference diversity which is an almost optimal joint spatial temporal trends cancellation processing for MIMO antennas although there are many problems to be solved, such as the BLAST system, the multi-user interference occurs, to achieve a multi-antenna mobile terminals reduce the complexity of the receiver so FPC built-in antenna manufacturers, but in the band limited resources unlimited growth of high-speed data needs reality, by increasing the transmit antennas to increase the spatial degrees of freedom, improve system performance, increase bandwidth efficiency has become a wireless communication A research field. MIMO technology with its unique advantages, will become one of the key technologies of the future of mobile communications, wireless communications system will be built-in antenna manufacturers _ FPC FPC built-in antenna manufacturers _ Shenzhen Aerospace communications provided by Aerospace Communications. This information consists of: providing Shenzhen Aerospace Communications Equipment Co. (szhytxsb.1688.com), we are business alliance member, the integrity of the whole network certification vendor. Feel free to contact us, Contact: Wei Maohu