Borealis LE4212L PE

Our company emerged PE [polyethylene] material shelf: Borealis LE4212L PE Use: Other Features Note: crosslinked Important parameters: melt flow rate: 2.2 g/10min density: 0.923 g/cm3 Elongation: 400% Manufacturer: Borealis Borealis LE4147 PE Limited Use: Other Features Note: good flow, low density Important parameters: melt flow rate: 2 g/10min density: 0.922 g/cm3 Manufacturer: Borealis Borealis Ltd. LE4960 PE Use: Other Features Note: good surface finish Important parameters: density: 0.922 g/cm3 Manufacturer: Borealis Borealis LE1169 PE Limited Use: Other Features Note: Antioxidants Important parameters: melt flow rate: 2.2 g / 10min Density: 0.92 g/cm3 Hardness: 52 Brittle temperature: -76 ℃ Manufacturer: Borealis Borealis FA7220 PE Limited Purpose: Film Features Note: better optical performance Important parameters: melt flow rate: 4 g / 10min density: 0.922 g/cm3 notched impact strength: 80 Tensile strength: 18 MPa Elongation at break: 650% Vicat softening point: 94 ℃ Manufacturer: Borealis Borealis FT3200 PE Limited Purpose: Film Features Note: No additives Important parameters: melt flow rate: 0.25 g/10min Density: 0.92 g/cm3 Tensile strength: 26 MPa Elongation at break: 600% Vicat softening point: 92 ℃ Manufacturer: Borealis Borealis FT5230 Ltd. PE uses: Film Features Note: No additives Important parameters: melt flow rate: 0.75 g/10min density: 0.923 g/cm3 Tensile strength: 24 MPa Elongation at break: 550% Vicat softening point: 97 ℃ Manufacturer: Nordic Chemical Co. factory that provides a variety of materials report COA MSDS UR yellow card SGS, etc. Contact: Mr. Wang: 13825743960 0769-82932991/2 ext 8013