Practical light-curing lamps | light curing lamps | shadowless lamp, ultraviolet UV lamps

Shenzhen Xin Li of industrial rubber accessories line (www.xldtokia.com) is located in Shenzhen, Guangdong Province, the Office of New Hualian Community Longhua West cattle to Po No. 69-2 (office), Contact: Miss Liu automatic Dispenser generation dates back to the sixties era, squeeze glue in plastic bottles, even under manual dispensing dispensing toothpick behind the case, so that many of the industry need to dispense had a huge practical defective light curing lamps, resulting in batch of irreparable loss orders, then in the sixties, manual dispenser was born, and with the development of automation technology, manual dispenser has been far from satisfying the needs of industry, and in the early eighties, automatic dispenser available. Science and technology are primary productive forces, the advent of the automatic dispenser to the needs of the industry made a great role as dispensing industry Opel (oupel) fluid control company to lead the trend of automatic dispenser, the point at the earliest glue automation equipment into China. With these years of portable handheld electronic products for the electronics industry's core dispensing technologies have become more sophisticated, in a series of light-curing lamps industrial applications, such as high-power LED dispensing (ie SMD points plastic machine), or UV glue / glue coated flexible circuit board technology is further upgraded. Micro-injection of high-viscosity fluid appears technology is an obvious example. High-viscosity fluid micro-injection technology principles of quality light-curing lamps, and exercise pressure pump process is similar. The injection technology used in UV curing adhesive (uv glue / spray) on electronic devices are very successful. Another new injection technology developed by Mydata. The jet dispensing technology uses a piezoelectric rods in a semi-enclosed chamber as the excitation components. The chamber for dispensing paste the feed supply is open, the supply line using a rotary positive displacement pump (RPDP). When the material is pressed into the chamber, movement of the standing wave of the piezoelectric material dimensionally stable high performance liquid droplets emitted from the nozzles light curing lamps, speed up to 500 droplets per second. This injection device launched in the Greek League dispenser is still relatively new, but promising a new method for coating a solder paste release, you can replace the screen printing method in prototyping or high-mix production line.