Simulation modeling of human limbs special silicone

Human Silicone Description: body gel, also called plus silicone molding, two-component addition cure silicone. Consists of two parts: A component is silica, B is the curing agent component; two stars in proportion of 1:1 ratio. Colorless oily liquid or skin color, vulcanized become soft elastic material. Silicone body uses: E600 # body gel is mainly used for body shape, chest pads, shoulder pads, patch, flexible silicone rubber non-slip mats and other products can also be used to simulate the human face silicone mold is mainly used for human face, mimicking the body shape, the same type. changing shape, soft touch, because it is food grade, can be used to produce food mold, high-grade silicone products. Human silicone features: temperature range and maintain its long-term use soft elastic properties at -65 ℃ -400 ℃. Nontoxic, by SGS, ROSH certified nontoxic. Has excellent electrical properties and chemical stability, water, ozone resistance, resistance to weathering, non-corrosive, with a physiologically inert, non-toxic, odorless, low linear shrinkage, easy to operate. Conventional product parameters (model) Model Color Viscosity Hardness Tensile strength Tear strength Elongation curing agent ratio operation time Curing time (cps) (Shaw Ao) (kgf/cm2) (kgf / cm) (%) (% ) (h) (h) E600 # Translucent 7000 0 ≥ 42 ≥ 19 ≥ 320 1:1 0.5-3 4-8 all parameters for reference only, any special needs, please contact us. Operation: A, B component by 1:0.95-1.05 mixed, after vacuum degassing can be watered, the operating time depending on temperature (0.5-3) H, curing time (room temperature) 12-24H, heating 80-120 ° C can cure in a few minutes. Fast-drying temperature is less than 20 minutes operating time, curing time is 1 hour. According to user needs can be dubbed red, yellow and other colors. Packaging: A component of 20,200 KG / barrel B component 20,200 KG / barrel according to non-dangerous goods transport, sealed and stored at room temperature for 2 years Note: This silicone Do not contact any other condensation silicone, otherwise it will cause curing agent poisoning , does not cause the cured silicone phenomenon. Water, impurities, organic tin catalyst, acid, alkali and other sulfur, phosphorus, nitrogen and organic matter can affect curing adhesive, or contact with these substances can not be mixed when used.