PC / PBT ENV39-NC800 U.S. Enviroplas

Our company is PC / PBT material shelf have: PC / PBT ENV39-NC800 U.S. Enviroplas Use: Other Features Note: low temperature impact resistance, good chemical resistance, good release properties Important parameters: melt flow rate: 13 g/10min Density: 1.2 g/cm3 mold shrinkage: 0.8% notched impact strength: 650 Tensile strength: 45.5 MPa Elongation: 120% bending strength: 71.7 MPa flexural modulus: 2010 MPa Heat Deflection Temperature: 73.9 ℃ Manufacturer: American Enviroplas company PC / PBT TE5001HZ Australia Sincerity Use: Other Features Note: Features: good dimensional stability, high impact resistance. Important parameters: density: 1.22 g/cm3 mold shrinkage: 0.7% notched impact strength: 590 Tensile strength: 59.8 MPa Elongation: 100% Bending strength: 83.4 MPa flexural modulus: 2160 MPa Heat Deflection Temperature: 110 ℃ Manufacturer: Australian Sincerity Company PC / PBT TE5101 Australia Sincerity Use: Other Features Note: 10% glass fiber reinforced. Features: good dimensional stability, high impact resistance. Important parameters: density: 1.29 g/cm3 mold shrinkage: 0.7% notched impact strength: 69 Tensile strength: 81.4 MPa Elongation: 6% Bending strength: 127 MPa flexural modulus: 3820 MPa Heat Deflection Temperature: 110 ℃ Manufacturer: Australian Sincerity Company PC / PBT XT EX3600-0002 UV Black PolyOne Use: Other Features Note: good impact resistance, good UV resistance, good weatherability important parameters affecting performance: Density: 1.2 g/cm3 notched impact Strength: 570 Bending strength: 80.9 MPa flexural modulus: 2120 MPa Heat Deflection Temperature: 83 ℃ Manufacturer: American PolyOne reports provide a variety of materials factory that COA MSDS UR yellow card SGS, etc. Contact: Mr. Wang: 13825743960 0769-82932991/2 ext 8013