Wuxi experimental electric furnace _ _ Kaituo high temperature laboratory furnace

Wuxi experimental electric furnace _ _ Kaituo high temperature laboratory furnace is provided by Kaituo furnace. Wuxi laboratory furnace _ Kaituo high temperature furnace _ experimental electric furnace Yantai Kaituo Ltd. (www.ktdlkj.com) 2014 upgrade been newly launched number of box-type resistance furnace temperature controller thermocouple model number Model number Model SX2-2.5 -101 units KSW-3D-11 1 station WREU-010 (L = 300mm) 1 Medium, temperature resistance furnace installation: (for 2.5-10, 4-10, 8-10, 12-10, 2.5-12, 5 -12, 10-12, box type furnace) ① medium temperature furnace does not require special installation. Just flat on flat ground or indoor bench. The controller should avoid electric shock experiments manufacturers, their position may not be too close to experiment with electric stove, place hot enough electronic parts is not working properly. ② thermocouple insertion resistance furnace, the gap must be padded with asbestos rope. ③ According to the selected user resistance furnace temperature controller model and the experimental furnace, according to the wiring diagram to connect the power cord intelligent laboratory furnace, circuit lines, thermocouple wire (positive and negative attention may not be reversed). The introduction of an extra power supply installed at the power switch to control the power. For operator safety, the controller must be equipped with reliable electric ground.