Nanning melt flux | Nanning melt the solder manufacturers | Guangxi melt flux

 A new welding technology Fook Volt Power Equipment Co., Ltd. Guangxi melt the solder material as a ground network is mainly connected to the ground, it is mainly characterized by a rugged, full, no bubbles, electrical conductivity and strong, easy corrosion, the following specific performance in a welding weld joints should look no sharp corners, gaps, curling and other defects. 2, melting interfaces without honeycomb pores. 3 joints without cracks. 4 welding joints should be firm, not loose, no gaps. 5 splice connector weldment no nudity. 6 would cut weld joints were welded parts and are asked to combine melted between weldment (molecules). 7 No honeycomb pores. Power Equipment Co., Ltd. Guangxi volt Fook, exothermic welding Product Features: 1 same current carrying capacity of the conductor splice current load capacity, with good electrical properties, after testing, the DC resistance ratio change before and after welding close zero. This is a traditional connection to any unmatched. (2) good mechanical properties because the joints are melted, the linker molecule is a conductor, a permanent joint. 3. Impact resistance and stability experiments showed that under the impact of high current short Nanning melt the solder manufacturers, conductor melts before the joint, and thus will not receive the inrush current damage. 4 Since the corrosion resistance is strong melt joints showed no contact Nanning melt flux production, no residual stress, and the joint is covered with copper, thus greatly enhancing the corrosion resistance of the conductor. 5 Freedom reaction temperature regulation without external energy, no special equipment, no professional operators Nanning melt the solder, can operate indoors and outdoors, and the time to complete the entire connection process short. 6 simple connection can be welded to secure the metallic conductor, a different configuration of the reaction temperature, the more firmly welded joints, and better. Nanning melt flux | Nanning melt the solder manufacturers | Guangxi melt flux provided by the volt Fook electricity. Welcome to consult Guangxi Volt Power Equipment Co., Ltd. Fook (vafdl.d134.6266668.cn /), be sure to specify when contact is through the "Business Alliance Member" see, thank you! Contact: Mr. Huang