Anhui Chemical anti-tank supporting production gear manufacturers, reducer what is the principle

 Detailed cycloid reducer, parameters, properties, structure and representation: a, cycloid reducer is a relatively new type of drive mechanism, its unique smooth structure in many cases can replace common cylindrical gear reducer and worm reducer, cycloid reducer because: a high speed ratio and high efficiency, compact structure, small size, low noise, smooth running, reliable, long life, reasonable design, easy to install and so decomposed. Second, cycloid machine is a small teeth difference planetary transmission using a novel principle of deceleration devices, can be widely used in petroleum, chemical, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation, etc. industry as a driver or deceleration device, suitable working temperature of plus or minus 40 degrees, so cycloid reducer widely welcomed by users in various industries and fields have been widely used. Cycloid reducer basic principle: all cycloid gear reducer can be divided into three parts: input part, slow down some of the output section. On the input shaft with a misalignment of 180 ° double eccentric, the eccentric sleeve is equipped with two roller bearings, the formation of H institutions, two cycloidal center hole is eccentric sleeve arm bearing raceways and by the cycloid pin gear wheel and a set of needles arranged in a ring gear meshed to form small teeth difference internal gear reduction mechanism, in order to reduce friction in the small gear ratio, the needle teeth with needle teeth sets. When the input shaft with eccentric rotation one week, due to cycloid tooth Gallery characteristic curve of the needle by needle teeth on gear restrictions, therefore, cycloidal movement became a revolution that another plane motion of rotation, in Positive input shaft revolution, the revolution of the eccentric sleeve also, cycloid turned in the opposite direction, resulting in a differential gear reducer, Re-W output mechanism, low-speed rotation of the cycloid motion pass pin to the output shaft, resulting in a lower output speed. For more information see: http://www.cztyjsj.com/