UV inks RCA type UV coating surface wear 350 times more resistant to rubbing alcohol can be silk screen printing

UV screen printing ink series of fine ink characteristics: light, strong adhesion, excellent RCA tapes wear, alcohol-resistant properties Applicable materials: UV coating surface, strengthening acrylic and some metal parts. Applicable industries: 3C industries. Physical characteristics: printing mesh: 100T-140T dry conditions: first, to 60-70 ℃ bake about 40 minutes, then after UV dryer Thinner: A-100 Hardener: UV-01 color system: Only available in this series of ink reallocation shall not be mixed with other types of ink. Usage: (1) This is a two-component ink UV ink, should be added prior to use 10% of the UV-01 curing agent (2) The need to add 20-30% of diluents; (3) the substrate surface should be kept clean, no dust, no oil; (4) overprinting inks needed to be dry, and then proceed to the next color printing; (5) adding hardener ink should be used within four hours; ( 6) Drying conditions: first with 60-70 ℃ bake about 40 minutes, then after UV dryer. (7) The longer drying ink adhesion, abrasion resistance and other properties will be better, the general recommendation 24 hours before making a physical testing; Note: (1) Since a wide variety of printing and coating characteristics required for different standards same, do a trial printing determine compliance with quality requirements before mass production; (2) unused ink should be stored closed to prevent evaporation drying deterioration and pollution; hazardous materials: Class III hazardous materials (flammable liquids) Security features: (1) In order to protect the skin and eyes, wear protective gloves and goggles. If ink splashes onto skin, wash thoroughly with soap. If it gets into eyes, rinse immediately with plenty of water after a doctor. (2) storage and use of this product, please stay away from sources of ignition. Seal container after use, light airy environment preservation. (3) specific matters please refer to MSDS