The solar bracket c steel Specification

Solar bracket c steel Specification --- Zhejiang macro, metal Materials Co., Ltd. specializes in design and production of the c-beam, z steel, U steel, galvanized steel C, hot dip galvanized cable tray C steel, Tianjin C-shaped steel specifications C-shaped steel, Specifications C-shaped steel, reinforced C-shaped steel, double lock C steel, unilateral C-shaped steel. Zhejiang macro Metal Materials Co., Ltd. has 15 production lines, young development team, reasonable design, easy to use for customers to save a lot of manpower and material resources, and reduce costs. Its products are widely used in construction, automobile manufacturing, solar power generation, machinery manufacturing, transmission tower, bridge of the ship, military aviation, highway and railway construction, room equipment, container, mining bracket. Z steel roll forming, the section size is lightweight, extremely in line with the mechanical characteristics of the roof purlins, the mechanical performance of steel to get the full use, Z purlin, can reduce the weight of the roofing to reduce the amount of engineering steel alternative angles, channels, steel and other traditional steel purlins, which is called the cost-effective steel, new building materials. The solar bracket c steel Specification --- H-beam is divided into hot-rolled H-beam and H beam welding (H), hot-rolled H-beam is divided into flange H-beam, wide-flange H-beam (HW) (HM) and narrow flange H-beams (HN) three. HW H-beam height and width of the flange is basically the same; mainly used for steel core columns in the column of reinforced concrete frame structure, also known as reinforced with steel columns; mainly used in the steel column HM H-beam height and flange width ratio roughly 1.33 to 1.75, in the steel: a steel frame columns subjected to dynamic load frame structure used as a frame beam; example: device platforms. HN H-beam height and flange width ratio greater than or equal to 2, for beams; equivalent to the use of the I-beam HN steel; solar Bracket C --- H-beam steel Specification is a new economic construction. H-beam cross-sectional shape is economically reasonable, good mechanical properties, rolling sectional view of each point on extending more uniform, internal stress is small, compared with the ordinary beam having a large cross-sectional modulus, light weight, metal-saving advantages, enables construction structure to reduce 30-40%; but also because of its inner and outer legs parallel to the leg side at right angles, assembled combination into a member, you can save welding, riveting work amounted to 25%. Commonly used in the Order of the cross-sectional capacity, good cross-section stability of large-scale construction (such as factories, high-rise buildings), as well as bridges, ships, lifting and transport machinery, equipment foundation, frame, foundation piles. Then, the application of hot-dip galvanized steel strip, it can achieve some high-end applications, especially in the refractories. We can better accomplish the application of hot-dip galvanized steel strip products. Purchase information, please call Mr. Zhou: 13396511117 Zhejiang macro Metal Materials Co., Ltd. official website http://www.zhhjs.com solar bracket c steel Specification