The Nanjing Jiangning spot of the Supply YR the wound motor Shanxi Motor Factory YR160M-8 4

 Wound motor supply YR Shanxi Motor Factory YR160M-8 4 the Nanjing Jiangning spot YR series motors Product Description: YR series motor a protective wound rotor three-phase asynchronous motor, motor power rating and mounting dimensions conform to IEC international standard, shell protection class (IP54 55) Cooling method IC01, continuous duty (S1). Applicable to non-flammable, explosive, corrosive gases and cleaner, more natural place. Wide range of applications, such as winches, machine, wire drawing machine, compressors, ball mills, sugar mills, hoist, conveyor belts need to re-load starting, Short-term load operation of mechanical equipment. Supply YR the wound motor Shanxi Motor Factory the Nanjing Jiangning YR160M-4 spot YR series motors range of applications: (1) greater than the squirrel cage rotor motor starting torque; (2) the feed line capacity is insufficient to start squirrel cage rotor motor; (3) start-up time is longer and more frequent starter; (4) The need for a small range of speed control; together into "axis" for synchronous drive occasions Supply YR wound motor Shanxi Motor Factory YR160M-Nanjing Jiangning spot YR series motor Features: 1, high efficiency, strong overload capacity, low noise, small vibration, reliable structure, beautiful appearance of the series motor is used to replace JR, JR2, JR3 old series wound rotor motor upgrading of products, especially for the exports and imports of equipment for interchangeable. 4 energy saving, improve the the supporting mainframe technology level and run reliability This series of motor full voltage direct start, but when starting the rotor circuit must be connected to starting rheostat or frequency sensitive resistor normal operation after the completion of the starter should be three pinout of the rotor winding shorted. YR series motor models and parameters: series Model Power Current number of revolutions efficiency power Maximum torque rotor factor Rated torque voltage and current noise and vibration moment of inertia weight 4-pole YR132M1-4 4 9.4 1421 84.5 0.77 3.0 230 11.5 86 1.8 0.15 88 YR132M2- 4 5.5 12.5 1434 86 0.77 3.0 272 13 86 1.8 0.17 96 YR160M-4 7.5 15.8 1444 87.5 0.83 3.0 250 19.5 90 2.8 0.23 108 YR160L-4 11 22.8 1426 89.5 0.83 3.0 276 25 90 2.8 0.27 115 YR180L-4 15 30.1 1434 89.5 0.85 3.0 278 34 94 2.8 0.39 205 YR200L1-4 18.5 36.7 1439 89 0.86 3.0 247 47.5 94 2.8 0.51 277 YR200L2-4 22 43.1 1448 90 0.86 3.0 293 47 94 2.8 0.54 290 YR225M2-4 30 57.6 1442 91 0.87 3.0 360 51.5 98 2.8 0.93 250 YR250M1-4 37 70.6 1448 91.5 0.86 3.0 289 79 98 3.5 1.29 480 YR250M2-4 45 85.9 1453 91.5 0.87 3.0 340 81 100 3.5 1.43 500 YR280S-4 55 103.8 1457 91.5 0.88 3.0 485 70 100 3.5 2.27 620 YR280M- 4 75 140 1485 92.5 0.88 3.0 354 128 103 3.5 2.89 720 YR315S-4 90 162 1485 92.5 0.86 3.0 525 104 103 3.5 4.65 1060 YR315M1-4 110 201 1485 93 0.86 3.0 525 127 103 3.5 5.22 1080 YR315M2-4 132 240 1485 93.2 0.86 3.0 601 133 106 3.5 5.68 1125 YR315L1-4 160 284 1486 93.2 0.86 3.0 722 134 106 3.5 6.47 1131 YR355M1-4 160 286 1483 93.3 0.87 3.0 352 277 106 3.5 11.54 1650 YR355M2-4 185 326 1483 93.5 0.87 3.0 348 294 106 3.5 12.58 1723 YR355L1-4 200 355 1486 94 0.87 3.3 422 288 106 3.5 13.04 1740 YR355L2-4 220 389 1486 94 0.87 3.3 470 285 106 3.5 14.2 1825 YR355L3-4 250 444 1487 94 0.87 3.5 528 287 108 3.5 15.13 1900 YR355L4- 4 280 495 1488 94 0.87 3.5 604 281 108 3.5 16.98 2115 YR400M1-4 280 512 1488 94.2 0.86 3.5 545 311 108 3.5 21.51 2721 YR400M2-4 315 566 1489 94.2 0.86 3.5 595 320 108 3.5 23.54 2823 YR400M3-4 355 631 1489 94.5 0.87 3.5 674 318 108 3.5 26.07 2960 YR400M4-4 400 716 1489 94.5 0.87 3.5 776 311 108 3.5 28.35 3082 YR400L1-4 450 795 1490 94.8 0.89 2.5 847 320 108 3.5 33.01 3295 YR450 1-4 500 858 1492 95.2 0.89 2.8 722 412 108 3.5 YR450 2-4 560 962 1493 95.3 0.89 2.8 867 384 111 3.5 YR450 3-4 630 1076 1493 95.4 0.9 2.8 878 427 111 3.5 YR450 4-4 710 1219 1494 95.5 0.9 2.8 1085 389 111 3.5 YR450 5-4 800 1361 1493 95.6 0.9 2.8 1121 424 111 3.5 Note: 1, the table for the rated voltage 380V, rated frequency 50Hz data. 2, H450 frame size orders, technical communication should be done. Series Model Power current maximum torque rotor revolutions efficiency power factor Rated torque voltage and current noise and vibration moment of inertia weight 6 pole YR132M1-6 3 8 949 80.5 0.69 2.8 206 9.5 82 1.8 0.2 89 YR132M2-6 4 10.7 949 82.0 0.69 2.8 230 11 82 1.8 0.21 97 YR160M-6 5.5 13.2 940 84.5 0.74 2.8 244 14.5 82 2.8 0.28 145 YR160L-6 7.5 17.8 947 86.0 0.74 2.8 266 18 85 2.8 0.32 153 YR180L-6 11 23.6 949 87.5 0.81 2.8 310 22.5 85 2.8 0.46 203 YR200L1-6 15 31.8 955 88.5 0.81 2.8 198 48 88 2.8 0.67 280 YR225M1-6 18.5 38.3 955 88.5 0.83 2.8 187 62.5 88 2.8 0.92 330 YR225M2-6 22 45 964 89.5 0.83 2.8 224 61 88 2.8 1.03 350 YR250M1-6 30 60.3 966 90.0 0.84 2.8 282 66 91 3.5 1.8 480 YR250M2-6 37 73.9 967 90.5 0.84 2.8 331 69 91 3.5 1.95 510 YR280S-6 45 87.9 969 91.5 0.85 2.8 362 76 94 3.5 3.06 620 YR280M-6 55 106.9 972 92.0 0.85 2.8 423 80 94 3.5 3.4 670 YR315S-6 75 142 989 93.0 0.85 2.8 419 108 98 3.5 7.47 930 YR315M1-6 90 171 991 93.5 0.85 2.8 516 105 98 3.5 8.7 1050 YR315M2-6 110 207 991 93.5 0.85 2.8 611 108 98 3.5 9.86 1205 YR315L1-6 132 246 993 93.5 0.85 2.8 604 131 102 3.5 10.8 1414 YR355M1-6 132 246 988 92.8 0.86 2.5 301 269 102 3.5 14.54 1630 YR355M2-6 160 294 988 93.0 0.86 2.5 331 296 102 3.5 15.73 1703 YR355L1-6 185 341 990 93.3 0.86 2.5 390 290 102 3.5 17.52 1825 YR355L2-6 200 370 990 93.5 0.86 2.8 442 276 102 3.5 19.31 1923 YR355L3-6 220 404 991 93.6 0.86 2.8 474 283 102 3.5 20.5 1990 YR355L4-6 250 459 991 93.8 0.86 3.0 553 273 105 3.5 22.89 2110 YR400M1-6 250 447 991 94.8 0.85 3.0 545 274 105 3.5 30.76 2698 YR400M2-6 280 495 991 94.8 0.86 3.0 578 290 105 3.5 32.75 2775 YR400M3-6 315 557 992 95.0 0.86 3.0 655 287 105 3.5 36.07 2889 YR400M4-6 355 629 992 95.0 0.86 3.0 736 288 105 3.5 39.38 3012 YR400L1-6 400 707 993 95.2 0.86 2.8 870 274 ??105 3.5 46.18 3261 YR400L2-6 450 788 993 95.2 0.86 2.8 958 280 105 3.5 51.49 3429 YR400L3-6 500 880 993 95.2 0.87 2.8 1064 279 105 3.5 51.49 3461 YR450 1-6 500 879 994 95.3 0.87 2.8 972 306 105 3.5 YR450 2-6 560 982 994 95.4 0.87 2.8 1080 308 108 3.5 YR450 3-6 630 1101 994 95.5 0.87 2.8 1216 308 108 3.5 YR450 4-6 710 1243 994 95.6 0.87 2.8 1390 303 108 3.5 Note: The table for the rated voltage 380V, rated frequency 50Hz data. Series Model Power Current number of revolutions efficiency power Maximum torque rotor factor Rated torque voltage and current noise and vibration moment of inertia weight 8 extremely YR160M-8 4 10.5 703 82.5 0.69 2.4 216 12 78 2.8 0.27 140 YR160L-8 5.5 14.1 705 83.0 0.71 2.4 230 15.5 78 2.8 0.31 155 YR180L-8 7.5 18.5 692 85.0 0.73 2.4 255 19 82 2.8 0.44 195 YR200L1-8 11 26.6 699 86.0 0.73 2.4 152 46 82 2.8 0.66 279 YR225M1-8 15 34.5 706 88.0 0.75 2.4 169 56 86 2.8 1.01 330 YR225M2-8 18.5 42.1 712 89.0 0.75 2.4 211 54 86 2.8 1.17 360 YR250M1-8 22 48.1 710 89.0 0.78 2.4 210 65.5 86 3.5 1.77 480 YR250M2-8 30 65.3 713 89.5 0.77 2.4 270 69 90 3.5 2.02 510 YR280S-8 37 79 715 91.0 0.79 2.4 281 81.5 90 3.5 2.97 640 YR280M-8 45 92.9 725 92.0 0.8 2.4 359 76 93 3.5 3.73 720 YR315S-8 55 113 740 92.2 0.79 2.4 339 98 93 3.5 7.47 970 YR315M1-8 75 150 741 92.5 0.79 2.4 432 105 96 3.5 9.06 1010 YR315M2-8 90 182 742 92.6 0.79 2.4 528 102 96 3.5 10.39 1060 YR315L1-8 110 220 743 92.6 0.79 2.4 635 104 96 3.5 10.1 1352 YR355M1-8 110 221 740 92.0 0.79 2.4 271 250 96 3.5 15.01 1485 YR355M2-8 132 265 741 92.4 0.79 2.5 316 256 99 3.5 16.72 1565 YR355L1-8 160 318 742 92.5 0.79 2.5 379 258 99 3.5 19.53 1640 YR355L2-8 185 368 742 92.6 0.79 2.6 447 253 99 3.5 22.34 1703 YR355L3-8 200 392 743 93.0 0.79 2.6 475 256 99 3.5 23.59 1731 YR355L4-8 220 436 743 93.0 0.79 2.6 543 246 99 3.5 26.4 1792 YR400M1-8 220 428 742 94.2 0.77 2.8 422 313 99 3.5 33.92 2785 YR400M2-8 250 485 743 94.2 0.77 2.8 475 315 102 3.5 37.91 2929 YR400M3-8 280 548 743 94.2 0.77 2.8 542 308 102 3.5 41.92 3061 YR400L1-8 315 623 744 94.5 0.77 2.8 633 297 102 3.5 45.24 3194 YR400L2-8 355 694 744 94.5 0.78 2.8 691 306 102 3.5 49.23 3343 YR400L3-8 400 775 744 94.5 0.78 2.8 760 313 102 3.5 53.88 3513 YR450 1-8 400 776 745 94.6 0.79 2.8 704 337 102 3.5 YR450 2-8 450 863 745 94.7 0.79 2.8 775 345 102 3.5 YR450 3-8 500 958 745 94.8 0.79 2.8 861 344 102 3.5 YR450 4-8 560 1072 745 95.0 0.79 2.8 969 342 105 3.5 Note: The table for the rated voltage 380V, rated frequency 50Hz data. Series Model Power Current number of revolutions efficiency power Maximum torque rotor factor Rated torque voltage and current noise and vibration moment of inertia weight 10-pole YR315S-10 45 97 593 92.0 0.73 2.4 334 81 93 3.5 6.42 1025 YR315M1-10 55 119 593 92.3 0.73 2.4 409 81 93 3.5 7.13 1086 YR315M2-10 75 137 594 92.5 0.73 2.4 566 79 96 3.5 9.09 1222 YR315L1-10 90 193 594 92.5 0.73 2.4 672 80 96 3.5 9.98 1304 YR355M1-10 90 192 592 92.5 0.73 2.5 248 221 96 3.5 15.22 1389 YR355M2-10 110 235 593 92.6 0.73 2.5 306 217 96 3.5 18.03 1545 YR355L1-10 132 282 593 92.8 0.73 2.6 372 214 99 3.5 21.15 1711 YR355L2-10 160 339 594 93.0 0.73 2.6 434 222 99 3.5 23.96 1873 YR400M1-10 185 382 594 93.5 0.75 2.8 401 276 99 3.5 38.58 2829 YR400M2-10 200 412 594 93.5 0.75 2.8 435 275 99 3.5 41.56 2924 YR400M3-10 220 450 594 93.5 0.75 2.8 474 277 99 3.5 45.28 3044 YR400L1-10 250 513 595 94.0 0.75 2.8 547 273 102 3.5 51.24 3230 YR400L2-10 280 573 595 94.0 0.75 2.8 608 275 102 3.5 26.44 3402 YR400L3-10 315 647 595 94.0 0.75 2.8 684 274 102 3.5 62.40 3594 YR450 1-10 355 712 596 94.5 0.76 2.6 670 314 102 3.5 YR450 2-10 400 796 596 94.6 0.77 2.6 766 310 102 3.5 YR450 3-10 450 882 596 94.7 0.77 2.6 803 333 102 3.5 YR450 4-10 500 500 596 94.8 0.78 2.6 894 332 102 3.5 12 pole YR400M1-12 132 284 494 93.2 0.72 2.5 407 193 99 3.5 35.95 2716 YR400M2-12 160 345 494 93.2 0.72 2.5 498 191 99 3.5 42.65 2917 YR400M3-12 185 396 495 93.5 0.72 2.5 561 196 99 3.5 47.11 3055 YR400L1-12 200 414 494 93.5 0.73 2.5 587 203 99 3.5 51.58 3201 YR400L2-12 220 467 495 93.5 0.73 2.5 670 195 99 3.5 56.05 3340 YR400L3-12 250 528 495 93.5 0.73 2.5 749 198 102 3.5 62.00 3533 YR450 1-12 250 519 496 93.6 0.74 2.0 594 249 102 3.5 YR450 2 -12 280 582 496 93.7 0.74 2.0 679 244 102 3.5 YR450 3-12 315 653 496 93.8 0.74 2.2 794 235 102 3.5 YR450 4-12 355 738 496 94.0 0.74 2.2 912 230 102 3.5 YR450 5-12 400 819 496 94.2 0.75 2.1 953 248 102 3.5 Note: The table for the rated voltage 380V, rated frequency 50Hz data. YR Model Description: For example: YR400 L3-8J YR: wound rotor three-phase asynchronous motor 400: Center height (mm) L: the length of the base Code 3: Code of core length 8: Number of poles J: the basis of the standard power level the increased power file YR series motor product line Description: Rated voltage 380V Rated frequency 50Hz power range to 630 KW protection class IP54 55 Insulation class Class B or Class F Cooling method IC01 S1 Number of poles 4, 6, 8, 10 , 12 Address: Shanghai Qingpu Industrial Park surplus Hong Kong East Road 8300, Lane 153, Tel: 18817733356 Fax 021 -39651673 Tencent QQ: 413272461 Website: www.donghaijd.net www.donghaijd.com Ordering Information: motor B level or class F insulation, rated voltage of 380V (can also be made 660V), rated frequency of 50 Hz, the stator is delta connection (660V Y connection), the rotor is Y connection. Construction and mounting of the motor for IMB3 (Frame with foot, cover flange, horizontal). Stator and outlet: H160-315 side of the outlet; H355-400 top outlet. This series motors can directly start at full pressure, but at the start when the rotor circuit must be connected to starting rheostat or frequency sensitive resistor, should start after the completion of the normal operation of the rotor windings of the three lead wire short-circuited. Does not allow a direct short circuit on the collector ring or brush holder (including three pinout) starting to use. 1 Please specify when ordering the motor model, power, speed, voltage, frequency, installation type, the location of the junction box and outlet hole sealing structure. If you do not specify the outlet hole sealing structure at stamping closures supplier. H63 to 112 cast iron and cast aluminum two structures, please specify when ordering. Such as user have special requirements: such as the installation of the the thermistor; filling hole device; need the other frequency and voltage; biaxial stretch; hot and humid with motor (TH), specified in the contract and prior Contact the factory, after the signing of the contract or agreement by mutual consent. Sale: the product in strict accordance with national standards, quality Three Guarantees service, warranty period of one year. Second, the performance of the contract: winter sea Shanghai Electrical and Mechanical Technology Co., Ltd.. Post () of the goods Location: Shanghai Dong Hai Electrical Technology Co., Ltd., the agency checked. Transport and arrival station (Hong Kong) and cost burden: Automotive LTL to the location of the customers, the cost borne by the supplier. , Acceptance criteria, methods: In accordance with national standards. Settlement and duration: 100% payment before shipment. VII, breach of contract: Contract Law. Eight agreed to resolve contract disputes: negotiation process. Other matters agreed: the acceptance period for the receipt date within one month from the. Its acceptance of the goods from the date of one year product failure, confirmed by the supply-side technology department is a product design, production responsibility, replace or repair free of charge by the supplier. As a result of improper use by the supplier to provide paid services.