Supply newly developed cement foam wall fire insulation board quote

The foam cement production can be divided into physical foaming and chemical foam. Physical Foaming: The foaming agent was prepared by mechanical equipment to a foam and then the foam was added to a slurry made of cement-based cementitious materials, aggregate, admixtures, additives and water, by mixing, pouring molding, conservation from the insulation sheet (hereinafter referred to as cement foam insulation board). Chemical foam: Add a blowing agent by a cement-based cementitious materials, aggregates and admixtures, admixtures and water, a slurry made by mixing, pouring, so that by a chemical reaction in the mold leaving The slurry internal closed pores, conservation, cut from insulation sheet. Edit this paragraph Features are otherwise material, non-toxic, environmental protection, low-carbon national efforts to promote a new type of material, its fire performance to reach the A1 level. The product has high compressive strength (plastic foam ratio), low thermal conductivity, strong bonding with the concrete, expansion coefficient, the useful life of the same building. The product is mainly used for roof insulation board, interior and exterior insulation board adhesive mortar directly bonded with cement mortar coating for external wall insulation board surface, the protective layer can be directly used waterproof of cracking mortar and fiberglass mesh to do Edit this paragraph physical indicators density (kg / m 3) Thermal conductivity W / (mk) compressive strength (MPa) 100-160 0.042-0.048 0.2-0.4 160-240 0.048-0.068 0.4-0.8 260-400 0.07-0.09 0.8-3 450-700 0.1-0.15 3.5-7 used as interior and exterior wall and roof insulation, product specifications are 250mmX250mm, 300mmX250mm thickness 20mm-250mm