Supply Shaanxi stirred ball mill we continue to play to trends in technology

 Shaanxi stirring ball mill good developments in the field to build in the future effectiveness, the unique authentication authoritative market strong progress in research and development. Shaanxi stirred ball mill features: 1, high production efficiency. Its efficiency is more than ten times that of the roller ball mill. 2, low energy consumption. The agitating ball mill power consumption for the roller ball mill 1/4, is 1/13 of the jet mill. 3, ultra-fine grinding. Stirred ball mill can various materials (Mohs hardness between 2-10) uniform crushed to a micron fine. 4, no vibration, low noise, good operating environment. 5, good temperature control. Milling barrel peripherals water jacket and the external cooling system for the regulation of temperature, to ensure that the ball mill continuous intermittent operation. 6, the high degree of automation. Stopping the machine at any time to add other materials can detect the material to be ground, pumping system enables the automatic cycle of the materials, automatic loading and unloading. The worm gear system can easily make milling barrel flip replacement mixing arm the medium ball very convenient. Shaanxi stirred ball mill installation requirements: (1) level of Shaanxi stirred ball mill spindle tolerances ≤ 0.2 mm / m; (2) the Shaanxi stirred ball mill spindle in the vertical direction horizontal degree ≤ 1mm / m; (3) Shaanxi stirred the spindle and the concentricity of the motor shaft of the ball mill tolerance φ0.1mm; (4) Shaanxi stirred ball mill the axis of the the flywheel coupling with the motor coupling declination ≤ 40. The Shaanxi stirred ball mill installation (1) installation, first check the the foundation on reserved hole location in, installation elevation is consistent with the installation layout, lifting the ball mill and motor will check match based on the alignment on the basis of pre- pull good centerline, here the end of the beginning of change shaped pad adjusted to comply with the technical requirements for installation, and the foot nut screwed tight, then based second watering. (2) Subject to the second poured concrete foundation was solid after, and then fine-tune ball mill to meet the installation requirements of subsection (1), (2) and tighten the ball mill foot nut, and then fine-tune motor , to make it conform to the technical requirements of the installation of subsection (3), (4) and the foot nuts tighten motor. (3) All the installation is finished, turn the flywheel by hand, the spindle must rotate flexible, light and comfortable. In case of stuck, must be re-adjusted to achieve the required date. Information Number: 562 133 544