How to decorate supply Shenzhen hydrant

Hydrants how to lay out the "architectural design code for fire protection GB 50016 - 2006" provides that: 8.2.8 outdoor fire hydrant shall be arranged to meet the following requirements: 1 outdoor fire hydrants should be set along the road. When road width greater than 60m, to set the fire hydrant on both sides of the road, and should be close to the crossroads; 2 A, B, C liquid storage tank area and liquefied petroleum gas storage tank area fire hydrants should be set fire embankment or protective wall . 15m range within the fire hydrant from the tank wall, should not be counted in the number of the tank can be used; 3 outdoor fire hydrant spacing should not be greater than 120m; protection radius www.0755119.net outdoor fire hydrant should not be greater than 150m; in municipal fire hydrant protection radius of 150m or less, when the outdoor fire water less than or equal to 15L / s, and from time to set the outdoor fire hydrant; 5 outdoor fire hydrant quantity should be calculated and determined protection radius and outdoor fire water, each outdoor fire hydrant The water consumption shall be calculated as 10 ~ 15L / s; municipal fire hydrants with the distance of the object of protection in the range of 5 ~ 40m, can be included in the number of outdoor fire hydrant; the 6 outdoor hydrants should adopt ground type fire hydrant. Should have a ground type fire hydrant DN150 or DN100 and DN65 bolt port. Outdoor underground fire hydrant should DN100 and DN65 bolt port 1. Outdoor fire hydrant should be set by the cold regions freezing measures; 7 hydrant from the street should be no more than 2m from the housing wall should not be less than 5m; 8 process plant area of ??the fire hydrant should be set in the process around the device, the distance should not be large at 60m. When the process unit area width greater than 120m road side in the area of ??the device should be set a fire hydrant.