Production of hot dip galvanized electric gondola, galvanized electric gondola offer, even ho hot dip galvanized electric gondola sales

Hot galvanized electric gondola lease, galvanized electric gondola quotes, and even Howard hot dip galvanized electric gondola sales gondola is a way to replace the traditional scaffolding, hanging baskets can reduce labor intensity, improve work efficiency, and can be reused new work at heights equipment. This product basket, free scaffolding. The gondola of the construction costs to greatly reduce the construction cost of only 28% of the traditional scaffolding, and a substantial increase in work efficiency. Cradle operator is flexible, easy to shift, convenient and practical, safe and reliable. The care and maintenance of the gondola building: (1) operating a comprehensive check weld should unsoldering and drain solder connectors and fasteners should be complete, reliable, and regular checks, if loose should be timely reinforcement. (2) counterweight should be consistent with the gondola manual requirements, may be missing, and fixed to prevent sliding, and lost. (3) suspension institutions between the two hanging points distance should be suspended platform hanging point equidistant from the error of not more than 5cm. (4) Use should clean surface dirt, weld cracking appears deformation components, the use of rational processes repair paint off up painting in a timely manner, to avoid corrosion. Wire rope, wire rope: (1) must be used gondola provisions of the Manual models and non-use of other wire rope instead. (2) rope rope gondola specification requirements to meet. (3) wire rope connections use is strictly prohibited. (4) the timely removal of the adhesion of the mortar, paint and other debris on the work and safety rope. (5) wire rope clips occurring at the local injury or fatigue failure should be re-fixed. (6) regular checks of the wire rope should be no loose shares, kinks, broken wires, squash, and other defects, such as one of the following conditions must be immediately scrapped: ① wire rope 6d (d-rope diameter) length within 5 30d within the length of more than 10 broken wires. ② broken wires partial aggregation. ③ wire rope diameter is reduced by more than 7%. ④ surface wire wear or corrosion reached more than 40% of the surface of the wire diameter of the rope is significantly hardened. ⑤ caused by damage due to overheating or arcing. Safety locks: (1) security lock must be used in the calibration validity period. (2) The safety lock action should be flexible, lock rope reliable. Wire rope on the glue, mortar and other debris should be promptly removed, to avoid entering the security lock within and reduce the safety performance. (3) The safety lock failure should be professionals repair, after passing the test before use. (4) use of non-the artificially fixed security lock to open the handle and invalidate. (5) When the the security wire rope is taut, not rigid flip open the handle. (6) daily use, should be suspended platform lowered to the ground, relax work wire rope safety lock arm is in a relaxed state. (7) before each use should be required to lock rope inspection to inspection. (8) to the provisions calibration period of the safety lock