Zhengzhou Alme photographic film dealer

Chengdu Yonghe photosensitive materials manager: Liu Yue Cheng Tel: 15682017147 medical X-ray tomography (CT) of the film the KX341-type characteristics and uses of this product to polyester film base to support green-sensitive emulsion layer coated front felt back coating anti- the halo layer, computer-aided tomography professional film, suitable for all kinds of ordinary CT scan machine. This product is also very effective in isotope scanners, nuclear magnetic resonance, cathode tube ray and ultrasonic diagnosis. This product has a high resolution and picture clarity. Security lighting with lighting distance of 2.5 meters above the transmission range is greater than 630nm dark red Lucky LZ-2 safelight piece, Kodak № 2 safelight piece or other similar the safelight piece with power 15W bulb security lights? total lighting time of not more than 10 minutes. Processing This product is suitable for 90 seconds, 120 seconds, 150 seconds and other high-temperature pop flushing process recommended Lucky G-30 also apply to domestic and foreign high-temperature pop sets of drugs, recommended developing temperature 33 ° C to 35 ℃. Save the original packaging should be stored in a dry, cool, clean room? Prevent direct exposure to sunlight, harmful gases and rays infringement. Specific requirements are as follows: 1. Temperature and humidity: Temperature 10 ℃ to 23 ℃, relative humidity of 30% to 65%, away from heat storage. Gas: storage room shall hydrogen sulfide? Ammonia, sulfur dioxide and formaldehyde gas, and shall not be stored with developing drugs in the same room. The ray: away from the radiation source, ray dose should not exceed 0.1μGy / h. The film can withstand the general railway stations, airports, application-ray security checks do, but the cumulative number should not be more than three times. The stacked type: stand up storage from the pressure and adverse effects. Environment the best use of the environment should be at a temperature of 18 ° C to 24 ° C, relative humidity of 50% to 65% range. The shelf life of product shelf life is 24 months. Note 1. Should the original packaging film balance in the use of the environment for more than 4 hours before opening package uses. Should be careful to pick-and-place film, do not squeeze, folding, twisting and friction film to avoid artifacts and electrostatic traces do not have to use wet hands to pick up the film. Specifications and packaging: the specification packaging millimeters (mm) inches (in) / pocketed / Box / box 356 × 432 14 17 50 1 5 356 × 356 14 × 14 50 1 5 279 × 356 11 14 50 1 5