Supply of wire and cable tensile testing machine, integrated manufacturer of first-class service

Supply of wire and cable tensile testing machine, integrated manufacturer of first-class service: News Center 【Features】 wire and cable, tensile testing machine tensile machine host body, fixtures and movable high and low temperature part. The main body portion of the tensile machine with a full set of imported digital AC servo system, high-rigidity frame structure. High and low temperature test chamber using double-insulated glass door to facilitate the user to observe the test situation, and a stainless steel frame and liner, is not only beautiful, but also anti-corrosive. The novelty of the instrument, high accuracy, low noise, easy to operate. Double wire and cable tensile testing machine safety devices trip protection: mechanical, computer protection, to prevent exceeding the preset stroke force protection: You can set the emergency stop device: can handle unexpected situations overheat prevention device: Protecting the test and test box high-speed circuit protection: protection the heating circuit motor (blower? freezer): overload thermal relay (blower freezer over load protection) refrigerant pressure protection switch: protect the compressor, extending the life of the circuit breaker protection : protect the compressor, extending the life of the compressor overload protection switch, ultra-high temperature overload protection switch, water protection device wire and cable tensile testing machine Technical parameters Capacity choice: 2,5,10,20,50,100,200 Select Capacity: 500,1000,2000 kg general maximum damage to the specimen strength value of about 3 to 10 times the unit selection: g, kg, N, KN, LB (provided the system of international standard, metric, inch three, free to switch to use ) display device: full computer control (can be any production customers need to report data) Load Resolution: 1/100, 000 Load accuracy: ≤ 0.5% test speed: 0.1 ~ 500mm/min (in the computer can be set arbitrarily) test stroke: 400 , 500, 600 mm (according to customer requirements heightening) Test width: 40cm (customers can request widened) machine test space: (L × W × H) 40 × 40 × 70cm power system: servo motor + drive transmission : high-precision ball screw machine size: the host machine (L × W × H) 1200 × 600 × 1500cm Weight: 130KG using the power: 1 ∮, AC220V, 50 ~ 60Hz fixtures: products based on customer request custom stretch compression test fixture, a wire and cable tensile testing machine the cryogenic refrigeration control system Technical Parameters Temperature range: according to customer requirements, Min.-40 ° C ~ Max.150 ° C control modes: PID automatic temperature the calculus humidity range: 2 % RH ~ 98% RH Control Stability: ± 2.5% RH and ± 1 ° C distribution uniformity: ± 3% RH and ± 1 ° C cooling compressors: single-stage closed-end French the Taikang original compressor cooling rate: 1 ° C / Min timer: LED, to 9999 when 99 fair share of box material: SUS # 304 stainless steel mirror inside the box size: (L × W × H) 40 × 40 × 70cm (can be customized) Carton Material: sand grain double column of stainless steel plate, pulling machine for aluminum shaped timber, paint insulation layer: high-density rigid polyurethane foam plastic and 24K glass wool