Set can degreasing agent

New Material Technology Co., Ltd. in Hunan set can no acid, alkali-free, phosphate-free - unique formula 【Product Introduction】 At present, domestic and foreign technology they use in temperature strongly alkaline degreasing agent for degreasing. Such degreasing agent usually alkalis, silicates, phosphates, corrosion inhibitors, complexing agents, surfactants, etc. mixed together. Such skim the following drawbacks: 1 in 45 ~ 75 ℃ skim, to be equipped with heat source equipment, poor working environment; surface residual lye is difficult to clean, affect the process after phosphating quality; wastewater discharge pollute the environment. The Company for the above-mentioned state, developed a highly efficient room temperature (low temperature) water-based the microemulsion environmental degreasing agent. The product is acid-free, alkali-free, phosphate-free and transparent solution, a safe, environmentally friendly, easy to operate, at room temperature (low temperature 10 ~ 25 ℃) skimmed and high efficiency. Main performance without acid, alkali and phosphorus; chlorides, nitrates and other substances, colorless and odorless, neutral, not to hurt the skin, no corrosion of the workpiece, at room temperature (low temperature) skim, save energy, reduce equipment investment, reducing the overall cost of skim 3, fast penetration, strong detergency, thoroughly degrease rapidly; easy to rinse, no residue, wastewater treatment is simple, the use of low concentration, Bath preparation easy, stable, easy to produce precipitation, long service life 5, environmentally friendly water-based, non-flammable non-explosive, safe to use, convenient, easy to operate 6, especially for silicon steel (transformer), magnesium aluminum alloy, copper, magnesium, easy to produce corrosion materials skimmed Principal Applications efficient room temperature (low temperature ) microemulsion of water-based environmentally friendly degreasing agent, suitable for cold-rolled sheet steel profiles, such as iron and steel products in the coating, plating, painting, phosphating, black and other pre-treatment. Under certain conditions, instead of an organic solvent such as gasoline, kerosene and the workpiece degreasing. Efficient room temperature (low temperature) water-based microemulsion environmentally friendly degreasing agent suitable for the removal of the oil on the surface of the silicon steel sheet and wire, transformer, semiconductor ideal cleaning agent. Suitable for machining or stamping parts of cast iron stainless steel, magnesium alloy, copper, magnesium, titanium and other car cleaning. Can be used when using immersion, spray, wipe, ultrasonic technology. Lubricant or anti-rust oil, and metal parts attached to the surface dust, fingerprints, and other cleansing effect. This product can be used alone, active additives can also be used as an alkaline degreasing agent. 【Specifications】 concentration the PH value degreasing temperature skim time grease removal rate transparent aqueous solution at room temperature (low temperature) degreasing agent main technical indicators Appearance 2.5 ~ 3.5% 7.0 ~ 8.5 10 ~ 15 ℃ 8 ~ 15min ≥ 99% transparent aqueous solution of 2.5 to 3.5 % 7.0 ~ 8.5 15 ~ 25 ℃ 3 ~ 10min ≥ 99% [economic analysis] this agent compared with the existing warm skim, has the following advantages: the 1 to 10m3 degreasing tank meter, the annual energy savings (LPG) 8 to 12 million, to reduce investment and running costs of the heating system, alkali, acid-free, phosphate-free, no corrosion of the workpiece can reduce the cost of wastewater treatment, is conducive to "zero emissions", existing degreasing agent slot fluid concentrations of 5 to 7%, this agent bath concentration of 3% Contact: Mr. Lee 15974107599 www.jnxcl.com