Supply of Shijiazhuang sales of electric basket manufacturer

Routine inspections 
 Before the start of daily operations by the gondola operator basket daily inspection, and make a record, the device status of the basket to make the evaluation and treatment. 
 Routine inspections specified in Table 3 (the user can refer to Table 3 copy). 
 Third, the periodic inspection, 
 1, basket work after a certain time, they should carry out regular inspections, and make a record. Broken wire, loose stock, bending to conduct a comprehensive inspection, such as to be scrapped, and scrapped replacement. 
 2, each work should be two months after the safety inspection requirements to conduct a comprehensive inspection and check of the electromagnetic brake friction plate wear and damaged cable. 
 Each work six months on the safety lock a detection calibration, the user does not have the conditions should be sent to the manufacturer testing calibration. 
 Safety lock after each use, should be added to the anti-rust oil, to keep the flexible movement. 
 5, the first three months after the hoist gear to be replaced lubricating oil, after the monthly increase lubricating oil every six months to change a lubricant. 
 6, the security lock active portion of the monthly increase of one lubricant. 
 7, electrical wiring, electrical components and wire and the contact point must be kept dry and clean, not oil fouling. 
 8, in a safe, routine, periodic inspection and operating procedures, find fault, wear or abnormal, you should immediately stop using the overhaul by the full-time staff is strictly prohibited basket "sick". 
 9, all the force components and wearing parts to be scrapped, to be scrapped, to be replaced. 
 10, the establishment of the basket device file, and maintain hanging baskets normal intact.