Supply the SFT F3-3020 Glow wire tester

Product Use 

 Products during use, due to overload, short circuit, the electrical contact is bad or fault conditions, may reach too high a temperature to cause a fire hazard. Glow-wire test is to simulate the contained heat source of resistance to impose thermal stress of the samples in a short time, through observation and measurement, in order to assess the fire hazard of the sample. 

 Glow wire tester will require the material (φ4 Cr20Ni80) and shape of the heating wire with a large current is heated to test temperature (550 ° C to 960 ° C) for 1 min to the required pressure (1.0N) vertical the burnings test product 30s, depending on the test product and bedding material from the burning or holders of the fuel to determine the fire hazard of electrical and electronic equipment finished; determination of the ignitability of solid electrical insulating materials and other solid combustible materials, ignition temperature (GWIT), flammable and combustible index (GWFI ). 

 By Industry 
 For lighting, low voltage electrical appliances, household appliances, machine tools, electrical appliances, motors, power tools, electronic equipment, electrical instruments, IT equipment, electrical business equipment, electrical fittings and accessories such as electric and electronic products and their component parts , production and quality inspection departments, but also applies to insulating materials, engineering plastics, or other solid combustible materials industry. 
 Product Features 
 --- With the observation window of the box, the box which was black; 
 --- Touch-screen control; 
 --- With the exhaust; 
 --- The control panel is easy to control, such as light and exhaust functions; 
 --- Automatically set the device to test the speed can be reset quickly and the end of the test; 
 --- With the protection of the gate device; 
 --- Cabinets with the observation of light; 
 Meet the standards 
 IEC60695-2-10/11/12/13 (2000), IEC60335-1, IEC60598-1, IEC60745-1, IEC60884-1, GB/T5169.10/11/12/13, GB7000.1-2002, GB4706 
 Specification Performance 

 Power supply: 220V 50Hz or 115 60Hz 
 Temperature range: room temperature ~ 999 ° C (adjustable) 
 Glow Wire: nickel-chromium wire (Cr20Ni80 ￠ 4mm) 500W 
 Temperature fluctuation: ± 3 ℃ 
 Temperature components: TYPE K thermocouple (￠ 0.5mm), -200 to 1300 ° C 
 Heating transformer: 500VA, secondary: 2.5V, 150A 
 Specimens positive pressure of the glow wire: 1.0N ± 0.1N 
 Burning depth: 0 ~ 9mm can be preset, high subdivision stepper motor control 
 Burning time: 0 ~ 99S 
 Effective volume of the test area: ≥ 0.5m3, background black 
 Mode of operation: touch screen operation, the heating current directions, adjustable current device 
 Exhaust pipe diameter: 100mm 
 Dimensions (WxDxH): 1000mm x 650mm x 1250mm 
 Total weight: 80KG 
 Ordering Information 
 SFT the F3-3020 Glow Wire Tester - 220V 50Hz or 115 60Hz 
 Contains the following configuration: 
 A white pine test woodblock (thickness 10mm, 180 x 120mm); 
 A standard silver piece (purity ≥ 99.8%, thickness 0.06mm, 50 x 100mm); 
 5 silk paper (ISO04046); 
 Consumables 
 White pine test woodblock (thickness 10mm, 180mm x 120mm); 
 Standard silver piece (purity ≥ 99.8%, thickness 0.06mm, 50mm x 100mm); 
 Tissue paper (ISO04046, 50 sheets / pack, A3 paper size) 
 Glow wire (nickel chromium wire (Cr20Ni80, ￠ 4mm) 500W) 
 The TYPE K thermocouple (￠ 0.5mm), -200 to 1300 ° C