Supply of new straw briquetting machine

Straw briquetting machine operating requirements: 
 1, before starting the first injection of gear oil 25 kg, after refueling, tighten the filling hole plugs. 
 Carefully check the power lines, to prevent suffering point, leakage, to ensure the safe use of electricity. 
 3, double-check machine motor, transmission components connected parts of the bolts, screws, sturdy, with or without loosening to tightening. 
 4, according to material type of class to set the preheat temperature. Corn, wheat straw between 80 ℃ -90 ℃, peanut shells rice husk at 80 ℃ -100 ℃. 
 5, boot the first idle one minute, check the machine rotation is normal, normal, and then a small amount of feed, to be more than material within the machine out of the net before even loading. 
 6, on the material before it is important to note that the raw material in hard debris, put an end to the stone, iron, etc. into the silo to avoid damage to the machine. 
 Seven, eight hours per run to be on the universal joint, grease empty fuel time, one can oiling 2-3 drops. Stop a little wet material before, in order to smooth out the material the next day boot. 
 For Zhengzhou Rui Yong Machinery specializing in the production of straw briquetting machine, coal stick machine equipment, and autoclaved aerated block device, such as Welcome to buy!