Supply (float type liquid level controller), the float level controller

(Float type liquid level controller), the float type liquid level controller TEL :0531-82,687,392 15,588,893,936 Contact: Wang%% float level meter%% float type level gauge sold in Shandong - Jiangsu - Jiangxi Province - Hebei - Henan - Zhejiang - Liaoning - Tianjin - Dalian - Xinjiang - Gansu - Sichuan - Guangdong - Guangxi - Anhui - Fujian - Hubei - Hunan - Chongqing - Yunnan - Ningxia - Inner Mongolia - Jilin - Shanghai - Guizhou - Shaanxi - Shanxi across the country UQK series magnetic float level transmitter, magnetic float, internal intensive installation reed catheter composition. Float specific gravity less than 0.5, when the float on the surface above, and move up and down along the catheter, the reed switch of the corresponding location of the catheter to float magnets produce magnetic fields driven by the dry build contacts energized (normally open contact) or disconnected (normally closed contact) and the output switching signal. Used to control seal or sealing pressure or non-pressurized container of water, oil, acid, alkali and other conductive and non conductive liquid level. 
 Technical indicators 
 Control range: H = 200 ~ 8000mm (beyond 4000mm hours of section installed) 
 Switch points :1-10 (normally open or normally closed contact in order to determine) 
 Switching capacity: 250VAC 0.5A 50VDC 0.5A 
 Pull-in error: ± 4mm 
 The release of error: ± 6mm 
 Output signal: Reed contact 380VAC, 2A life 50,000 times 
 Control of media temperature: -20 ~ 120 ° C 
 Working pressure: 0 ~ 0.6MPa 
 Float diameter: φ95mm 
 Medium Density: ≥ 0.68g/cm3 
 Medium viscosity: ≤ 0.1Pa.s 
 Control sensitivity: 10mm 
 Operating environment: Temperature -20 ~ 50 ℃ 
 Humidity ≤ 95% RH 
 Jinan Cheng Instrument Co., Ltd. 
 0531 -82,687,392 
 Phone: 15588893936