Buy submerged electromagnetic pulse valve

[Product Overview] Rui submerged pulse solenoid valve (also known as embedded valve), it is directly installed in the gas bag, with good direct injection, a smaller loss of working gas supply, gas supply pressure for a wide range of of occasions. 

 Technical index: 
 Working pressure: 0.2 ~ 0.6, ambient temperature: -10 ~ 55 (℃), using the media: clean air, diaphragm life: more than 1 million injection. 
 Connecting thread: 3 ", Length: 250mm, Width: 220mm, height: 200mm, weight: 3.7kg. 
 [Installation]: 
 Electromagnetic pulse valve input (IN), and the reservoir pump is connected to metal pipe, the output injection tube connected with dust box, connecting thread between are filled with PTFE Teflon tape fastening seal. 
 Choose the high quality of all imported brands: electromagnetic pulse valve but the heart of dust removal equipment, the total price of the overall pulse jet dust collector is about 5% of the price; the air box pulse dust collector 1% of the cost, use the highest quality import pulse valve, the valve than the use of domestic equipment to increase the total cost of only 1 to 2%. So save on the pulse valve equipment costs and bear the risk of failure of the entire dust removal system is not worth it. 
 Choose the valve manufacturer with long history: the valve manufacturer must have 10 years of production history and operation of successful cases, so as to ensure the pulse solenoid valves has a perfect quality assurance system, to really blowing 100,000 5 annual exemption. 
 Select 5-year warranty period: the number of pulse valves not sufficient to explain the experimental action level of quality valves, diaphragm must be the test of years of natural aging factors. Therefore, suppliers must provide a diaphragm valve and the electromagnetic coil of free warranty period, usually five years. 
 Choose a real injection of gas, not just to connect the pulse valve diameter size: Pulse valve interface size, often can not determine its cleaning function. Some of the pulse valve was designed with small-diameter diaphragm, but only to the interface increases. For example: The 2 ¨ diaphragm valves installed in 2 1 / 2 ¨ interface valve housing. This will make the valve caused by inadequate cleaning gas injection system is poor. 
 Choose low-pressure high school are able to apply the pulse valve: the valve pressure range of the pulse to reach at least 1 ~ 8kg/cm2. If the application process so that the resistance of the filter increases with time, you can adjust the air pressure to keep the dust bag good running resistance, to ensure that the filter bags will not paste. 
 Select the pulse valve production quality unity: the manufacture of the valve must be used with the center of the robot and CNC automatic production line, to eliminate due process caused by human production quality is not uniform. In a cleaning system, often due to a valve leak in the entire system collapse. 
 Choose low-resistance valve pulse: pulse valve gas injection need to ensure that the internal structure of large, long stroke diaphragm, the shell structure design according to valve fluid resistance. As the body of poor design, some 3 "gas injection valve interface can only be reached" 1 "2 gas injection valve interface. Selection of low resistance, high-volume pulse injection valves, each valve can be cleaning larger area of ??the filter, greatly reduce the overall cost of the injection system due to a reduced number of valves, dust collector operation and maintenance costs are reduced accordingly. 
 [Tips] about Rui submerged pulse solenoid valve, angled electromagnetic pulse valve, straight-through electromagnetic pulse valve advisory information, market information, Buy, our technical experts at your service around the clock, customer service providers bridge online Baidu, QQ / 24 hours dedicated service.